Machinist Relay | Linear Stage Compliant Structures

Share
HTML-code

Comments • 538

  • RocketSurgeon
    RocketSurgeon  1 weeks back

    I thought a Machinist Relay is a track and field event where the first machinist gets the baton to some state of completeness, doesn't tell the next guy what needs to be done, pulls a random fuse, hides the keys to the shop, and then hands the baton to the next guy. First team to pass the finish line with a fully machined baton wins.

    • Brennan Lukas
      Brennan Lukas  1 weeks back

      now that would be an Olympic event worth watchin

    • 3dsman
      3dsman  1 weeks back

      @AvE I heard the cops are looking out for a guy who's been breaking into local craft shops and dipping his testicles in the glitter. Yeah, it's pretty nuts...

    • Thefreakyfreek
      Thefreakyfreek  1 weeks back

      Sounds like my previous jop

    • John Francis Doe
      John Francis Doe  1 weeks back

      RocketSurgeon I actually expected a force control machine element that would also provide 2 or more distinct mechanical states, suitable for such things as levers and end stops.

  • etyrnal
    etyrnal  1 hours back

    I think you could have also put some harmonic dampener on the opposite side of the cuts to prevent buildup of harmonic resonance which probably contributed to the breakage.

    • James Willich
      James Willich  1 days back

      That foam is pretty garbage. A 2-part epoxy poured in the channel would hold significantly better.

      • jasondemate
        jasondemate  2 days back

        Use some of those sweet patreon dollars and buy some 136°F Eutectic Fusible Alloy. Fun to play with and great for temporarily fusing parts for machining. Cheap too!

        • Biohazarus
          Biohazarus  2 days back

          Could of put wax in it, but cleaver thinking!

          • vaderdudenator1
            vaderdudenator1  2 days back

            Wait, so who’s Quinn Ducky?

            • Bence Sárosi
              Bence Sárosi  2 days back

              @vaderdudenator1 Cool stuff, definitely check her out.

            • vaderdudenator1
              vaderdudenator1  2 days back

              Thanks! I think this is the first I’ve heard of her so I couldn’t get the spelling well enough to find the channel. It looks pretty good though

            • Bence Sárosi
              Bence Sárosi  2 days back

              Quinn Dunki, the owner of the channel BlondiHacks.

          • the4thj
            the4thj  2 days back

            GOD STOP WITH THE WELDING GO DRINK A BEER! TAKE OFF!

            • Michael Ravetti
              Michael Ravetti  2 days back

              A real part that gets paid engineering! Cooler than a frozen potato but not by much

              • Jacob May
                Jacob May  3 days back

                What's a guy gotta do to hear some classical music??

                • Mack Dlite
                  Mack Dlite  3 days back

                  Is that yellow Pisten Bully thing actually a part or just a sticker on something else?

                  • ricky Bobby
                    ricky Bobby  4 days back

                    How many subs does this man have?

                    • Shayn Webb
                      Shayn Webb  4 days back

                      Can you please pull apart a "Sovamedic Harmonie" machine on David Icke's website? That would be an interesting video in of itself! Thanks for the consideration!

                      • Moshe Galimidi
                        Moshe Galimidi  4 days back

                        AVE ! i got a gift for you how can i contact you?

                        • turbo2ltr
                          turbo2ltr  4 days back

                          Hope your coolant system has a good filter. You might want to change it at this point..

                          • Joe Waun
                            Joe Waun  4 days back

                            My new lathe is not low grade nor Chineseum. It's an OLD school craftsman metal lathe. I think it's technically bench top but it's solid

                            • Hard Knocks Forge
                              Hard Knocks Forge  5 days back

                              All my favorite ladies give massagies

                              • Mike Smith
                                Mike Smith  5 days back

                                It sounds like he is speaking English but I don't understand any of it

                                • WC_2 Electric_Boogaloo

                                  AvE, free tool.
                                  I have a Cryobi impact that is beginning to let the literal smoke out. I intend in replacing it with a milfuckee, so I won't be trying to warrenty it. My co-worker had one that caught fire while working, and id rather have it disposed of in either a safe manor or in a spectacular manor on camera.

                                  Id be happy to sent it to you so that you can fix it to death properly, in a vidjyo, for the interested public.

                                  • John Alexander
                                    John Alexander  5 days back

                                    Came back to say thanks for sending me to Dan Gelbart's channel. A wealth of knowledge.

                                    • billphillipstube
                                      billphillipstube  5 days back

                                      Bet that last run, when it all comes together, feels good.

                                      • m 88
                                        m 88  5 days back

                                        aluminium

                                        • James Klima
                                          James Klima  5 days back

                                          Hi AvE, I came across a video here about the Searl Effect Zero Point Generator. I would value your opinion and or discussion on if you think this is this a viable energy source. It's certainly not the usual half baked doesn't resemble reality in the slightest quackery. There is some very real physics to the claim. Please take some time to veiw it. You can reach me at jimklima at rocketmail dot com. Keep up the good work on the videos. Amusing as they are they have proved time and again to be very helpful.

                                          • bhartwigutube
                                            bhartwigutube  6 days back

                                            Glad someone knows the words... maybe you should tell Justin how the anthem goes....

                                            • Cody Tamling
                                              Cody Tamling  6 days back

                                              I'd be a liar if I said I didn't click the video because I saw a PistenBully sticker, drive around in one almost every day, but not in snow..in grain! Another awesome video man!

                                              • AvE
                                                AvE   6 days back

                                                In grain?! mind blown. VIDS PLEASE! Please!

                                            • Harry Graham
                                              Harry Graham  6 days back

                                              I have this old Weber Kettle Grill.. Can you help me build it, better, stronger, faster?

                                              • CGT80
                                                CGT80  6 days back

                                                5:27 I thought you were just doing a bad job of frying up some bacon while in the shop. Hope it didn't look like bird crap!

                                                • Irish Viking
                                                  Irish Viking  6 days back

                                                  Not sure you have enough coolant there.

                                                  • Carl Zarelli
                                                    Carl Zarelli  6 days back

                                                    Ave could you do a review on the Harbor Freight welder that purports to do TIG, MIG, And stick welding ? Thank you.

                                                    • priit mölder
                                                      priit mölder  6 days back

                                                      Wonder where it goes from here...

                                                      • TheManLab7
                                                        TheManLab7  6 days back

                                                        I'm no machinest but wouldn't of it been better to deck n get everything to size first before cutting the intricate details?

                                                        • Zedex 12
                                                          Zedex 12  2 days back

                                                          How you gonna hold them from wangling around? That floor to be decked off connects everything together so that the force of cutting doesn't break the part. (Of course introducing it's own challenges to overcome)

                                                      • criggie
                                                        criggie  6 days back

                                                        Stupid question about Order Of Operations - why not clean up the top/bottom/sides and then do the 2d path cutting last ? Feel free to school me if I'm talking out my arse.

                                                        • Robert Szasz
                                                          Robert Szasz  6 days back

                                                          Foam instead of just supergluing it to the plate and then adding some heat to get it loose?

                                                          • Jimmy Hartford
                                                            Jimmy Hartford  7 days back

                                                            I love stickers, all over the shop in odd places.

                                                            • TheYourfaceable
                                                              TheYourfaceable  7 days back

                                                              I prefer to keep my flexture precise down to 1 thou


                                                              Never know when the ladies are gonna bust out the microscope

                                                              • John McPherson
                                                                John McPherson  7 days back

                                                                I really enjoy the ave vijeos, and youtube had recommended i watch abom and some guy named old Tony.

                                                                It has been widely publicized that youtube radicalizes communities.

                                                                Is this a community of radical machinists?
                                                                I would enjoy a march in support of squirrel yakisoba and fancy noodle machines and against mediocre power tools. What do you suppose radical machinists look like?

                                                                • Jeffry Garew
                                                                  Jeffry Garew  7 days back

                                                                  I got you covered....
                                                                  AUTO Focus you Fvck.

                                                                  • John Collinsgrove
                                                                    John Collinsgrove  7 days back

                                                                    Super glue. Works great for stuff like that. When done just heat it up and glue will let go

                                                                    • MFeinstein
                                                                      MFeinstein  7 days back

                                                                      Wouldn't steel be better on this case? It wouldn't break as much at least.

                                                                      • EJ Brandt
                                                                        EJ Brandt  7 days back

                                                                        800% Scrap rate....Not too BAG! 👍

                                                                        • insideHARDWARE
                                                                          insideHARDWARE  7 days back

                                                                          Cliffhanger ending with no warning

                                                                          • World Theory
                                                                            World Theory  7 days back

                                                                            Huh… Neat! So the foam stuff is like the support structure in 3D printing, that you have to remove later.

                                                                            First time through, I didn't see that the plate hadn't been milled all the way through, so I was scratching my head, trying to figure out why you were foaming a completed part, and how that was supposed to retroactively keep it from falling apart during the milling. I noticed my confusion though (a good skill to have, by the way), and went back to watch it again, to find out that you (presumably) mill it part way, fill that in, then flip it over and (hopefully) mirror the schematic to finish milling it.

                                                                            • Grip Side
                                                                              Grip Side  7 days back

                                                                              I was lucky enough to meet Ms. Dunki this summer! She’s super cool! Glad to see you involved in the relay sir!!

                                                                              • Robert Clausecker
                                                                                Robert Clausecker  7 days back

                                                                                I wonder if you can add some bridges to the design for rigidity and then drill them out later—the drill should not exert enough force to break the delicate structures or you could clamp them down during drilling.

                                                                                • Trevor Scott
                                                                                  Trevor Scott  7 days back

                                                                                  I subscribe. I like how you talk.

                                                                                  • Trevor Scott
                                                                                    Trevor Scott  7 days back

                                                                                    Also your content is useful inna sense

                                                                                • bzacon
                                                                                  bzacon  7 days back

                                                                                  Gotta buy yourself a Sodick for flexture cutting!

                                                                                  • Snare X
                                                                                    Snare X  7 days back

                                                                                    Left me witg the big ol blue balls there fella

                                                                                    • Martin H
                                                                                      Martin H  1 weeks back

                                                                                      Maybe you could use wax instead of foam.
                                                                                      Would be a lot easier to clean up and also doesn't give you the cancer.

                                                                                      • Liam Cousin
                                                                                        Liam Cousin  1 weeks back

                                                                                        When the knife snapped off in the box I knew that at least the box was skookum